How to install a wooden floor? (For Beginners!)

how-to-install-a-wooden-floor
how-to-install-a-wooden-floor

WOODEN FLOOR

THE MOST IMPORTANT CHARACTERISTICS FOR YOU TO TAKE INTO ACCOUNT WHEN INSTALLING YOUR WOODEN FLOOR!

1-TOOLS FOR WOODEN FLOOR INSTALLATION:

 

To install the wooden floor, you must glue their ends and edges, since these are made of tongue-and-groove wood, that is, mortise joint, which are placed on foam or cork bases. To install a wooden floor, you must have the main materials and tools that will be used for said installation, which are:

Now, before starting the installation, the wood should be left to rest for about three days, since it is made of organic matter, so it can suffer contraction and expansion depending on the percentage of humidity in the air.

2-SOIL PREPARATION:

  • The first thing that must be done is to prepare the floor, for this we must cut it and reduce the pieces, to detach it with a long-arm scraper.
  • After removing it, the area should be left clean with a vacuum cleaner. Then a piece of wood is slid to see if there are any gaps, if there are they should be filled, then the base should be placed starting from a wall and cut to the right. measure with a knife.
  •  Finally, outline guide marks so that the pieces of wood are perfectly aligned.

3-FLOOR INSTALLATION:

  • The cut must be made in the lower part so that the floor to be installed is below it To do this, a piece of flooring is used to calculate the thickness to be cut.
  •  Subsequently, with a knife, the already cut pieces will be removed and the new floor will slide through the lower part of the cut molding of the door, pushing it against the wall.

4-PLACEMENT OF WOOD PIECES:

Finally, the pieces of wood will be placed, the first thing to do is adjust the first piece of wood in a corner. For this, you must use a wooden wedge to leave an increasing gap between the floor and the wall. Starting from the first placed piece, it will continue to slide the rest from end to end.

IT IS IMPORTANT TO TAKE INTO ACCOUNT

That the slot and the mortise joint must always fit together. You will then need to securely press the pieces together and insert a spacer near the joint. And finally, Install the piece of wood with glue and press it with a hammer to fit it in place. You may need to saw cut the last row to fit.

You Might be Interested

How to become a content creator and earn money [2022]